Silpak, Inc

Urethane Plastics

General List of Urethane Plastics

Urethane Plastic Resins are two-component, low viscosity, castable liquids that polymerize to a hard plastic part in 15-30 minutes. These quality-casting resins are used in art reproductions, model kits, stage props, prototype pieces, tools, and for duplicating masters. Several different systems that vary from cost, color, strength, and odor are available. Sizes: 1gallon kits (16#), 5gallon kits (80#), and 55gallon (900#) drum kits.

**This system has 1-4 hour cure time depending on part thickness

• Uncured Urethane Plastics are sensitive to moisture that can cause bubbles and foaming in casted parts. UV light can discolor cured urethane plastic parts.

• Fillers and Colorants are available for customizing finish piece.

• Urethane Plastics should be painted with an oil-base primer and cleaned with a solvent or hot soapy water solution before a final finish is applied.

• Optically Clear Casting Resins with UV stability are available---RU-500 Series


ACCESSORIES:
CU Pigments: Red, Yellow, Blue, Black, Brown, Flesh Tone, White
UD Translucent Dyes: Red, Yellow, Blue, Black
Bright Shade Powders: Glow Dust, Bright Green-Violet-Red-Yellow
Metal Powders: Bronze CB-21, Brass CG-10, Copper CC-11, Iron CI-30, White Metal CS-73

Fillers: Thermolite, Limestone CC-200, Hollow Glass HGF-100, Glass Beads GF-3000,
Thermo-Conductive GAP-25, Marble Powder MP-200, Porcelain PP-300

The information and data contained herein are based on information we believe reliable. Each user of the material should thoroughly test any application and independently conclude satisfactory performance before commercializing. Suggestions of uses should not be taken as inducements to infringe on any particular patent.