Products
Latex Accessories
ACCELERATOR
RL-CN: Available in 1 lb & 8 lb bags.
A Nitrate Crystal that is dissolved in water and alcohol. This solution forces the latex to coagulate quickly for multi-coat dipping.
COLORANTS
Latex Pigments : Available 2 oz jars, 1 lb jars, 1 gallon.
Red, Yellow, Flesh, Blue, Black and White
FABRICS
Burlap: 40" inch wide x 10 yards long Bags or Roll of 100 yards.
Loose, strong burlap fabric used to build strength in latex skins. Used to reinforce edges in concrete stamps, Art projects and flexible molds.
Cheese Cloth: 36" inch wide by 20' foot long Bags or Roll of 100 yards.
Cheese cloth is used to reinforce mold where stretching is not needed. This thin, yet strong fabric, will easily drape over various contoured surfaces.
FILLER
RL400T: Available in 5 lb & 50 lb Bags.
Black, fine ground rubber which is used to build plugs and fill in deep undercuts in latex molds for easier mother mold construction. The rubber compound forces the latex to cure in thick cross sections.
MOTHER MOLD SUPPORT
Cast Shell Plaster: Developed to assist moldmakers when making plaster mother-mold support shells. It offers improved flow control and low sag, allowing for better vertical application. Add Hemp Fiber to lighten and strengthen support shell.
SLR-22: Polyester laminating resin used to make mother-molds when supporting thin walled latex, urethane or silicone rubber molds. Use in conjunction with Fiberglass Mat or Chopped strand fibers for reinforcement.
RELEASES
R-100-50 : Available in 1 & 5 Gallons.
Non-silicone, water based compound for un-molding cement and plaster castings. Dilute with water up to 7 parts.
RL-CS: Available 5 lb & 25 lb Bags.
Calcium Stearate powder release agent against concrete. Great for concrete stamps.
Mold Wax: Part-All #2 is used as a separating release when constructing a mother-mold made of plaster. **Use High Temp Wax for mother-molds made of resin or foam.
THINNER
RL Thinner: Available in 1 & 5 Gallons
Ammonia based solution to thin latex.