Products
General List of Fillers
Fillers are used to alter form and function of resins. Some may decrease shrinkage, increase or decrease weight, assist in roto-casting, add thermo-conductive properties for vacuum forming, or alter appearance. Many fillers are versatile and offer one or more benefits. **Recommended levels of additional filler are based on Total Resin Weight—A + B Components, and are pre mixed to the A-side of mixture prior to blending both components.
Aluminum Trihydrate (ATH)
Filler used in Polyester & Epoxy resins for fire retardancy (Contains moisture; not recommended for Urethanes)
AP 120 Atomized Powder
Buffable, fine mesh powder used to create a polish pewter appearance in resins. Recommended level 100%.
CC-200
Limestone filler (off white color, fine particle size) used to lower cost and add weight to urethane and polyester resins. Recommended levels 50-200%.
GAP-25
Grey aluminum powder mixture of thermal conductive powders used to decrease thermal distortion, lower shrink, and increase hardness in urethane resins. Add ratios 50-200% by weight. GREAT FOR VACUUM FORM TOOLING @ 50% by weight ratio.
GF 3000 Glass Filler
Surface treated, high-density glass filler. Good extender for creating greater scratch resistant surface and reducing shrinkage for master pieces. Recommended levels 200%.
HGF 100 – Hollow Glass Spheres
Low-density filler used to create lightweight pieces. Recommended levels 5% to 10%. (8.75 LB. CUBIC FEET)
Metalic Powder Bronze (CB-21) Copper (CC-11) Gold (CG-10) Iron (CI-30) Pewter (AP 120) Silver (CS 73)
Used in resins to create beautiful polished cold cast metal sculptures. Buff and polish the metallic castings and see the amazing results. Recommended levels 200 - 300%.
MP-200 - Marble Powder
Simulated White Marble. Recommended levels 50-200%.
PE ESS 5F Mini Fibers
Used to reinforce and thicken both RTV rubbers and resins for brush-up applications. BETTER THAN CABOSIL AND STRONGER THAN CHOPPED FIBERGLASS STRANDS. Recommended level 5% 10% by weight.
Thermolite
Fly ash powder that reduces weight, improves paint adhesion, lowers exotherm and aids in roto-casting. Thermolite is excellent as a release for hot white metal in silicone molds. Recommended levels 50% to resin weight.
Whiting #2 – UV master batch additive to stop “White” color loss in Silcast ll and Quickcast resins. Add 20-30% to A side only.
The information and data contained herein are based on information we believe reliable. Each user of the material should thoroughly test any application and independently conclude satisfactory performance before commercializing. Suggestions of uses should not be taken as inducements to infringe on any particular patent.